Roofing
Waterproofing
Thermal insulation
Door
Building materialsBitumen membranes
The most widespread materials for the creation of the waterproofing layer are the polymer-bitumen roll-fed membranes. This is due to a relative simplicity of installation, popularity of the technology, durability of the material and stability of the factory-set technical parameters.
Polymer-bitumen membranes are commonly used for waterproofing of foundations, engineering structures, roads, bridge decks and flat roofs. These materials could also be used as an underlay for pitched roofs and as a vapor barrier.
The waterproofing membrane not only protects the internal premises from water penetrating inside, reducing their operating ability, disturbing the process equipment operation and worsening the microclimatic conditions indoors, but it also prevents the destruction of the foundation and supporting structures. Therefore, the correct selection and installation of the waterproofing membrane also ensure the durability of the whole facility.
One layer modified bitumen materials
| Ruļļa garums/platums (m) | Pamatnes veids | Biezums (mm) | Svars (kg/m2) | Elastība zemās temperatūrās (°С) | Siltumizturība (°С) | Pārraušanas spēks G/Š (N/50mm) | Pārraušanas spēks ar naglu G/Š (N) | Īpašais pagarinājums G/Š (%) | |
|---|---|---|---|---|---|---|---|---|---|
| MIDA FIX TOP PV S5 | 7.5×1 | Poliesters | 5.2 | 6.3 | ≤-25 | ≥+100 | 1000/800 | 300/300 | 40/40 |
Top layer modified bitumen materials
| Ruļļa garums/platums (m) | Pamatnes veids | Biezums (mm) | Svars (kg/m2) | Elastība zemās temperatūrās (°С) | Siltumizturība (°С) | Pārraušanas spēks G/Š (N/50mm) | Pārraušanas spēks ar naglu G/Š (N) | Īpašais pagarinājums G/Š (%) | |
|---|---|---|---|---|---|---|---|---|---|
| MIDA TECHNOELAST K-PS 170/5000 | 8×1 | Poliesters | 4.0 | 5.0 | ≤-25 | ≥+100 | 700/500 | 250/250 | 50/50 |
| MIDA TECHNOELAST PV S5b | 5×1 | Poliesters | 5.0 | 6.3 | ≤-25 | ≥+100 | 1000/900 | 400/400 | 40/40 |
| MIDA TECHNOELAST PV S4b | 10×1 | Poliesters | 4.2 | 5.2 | ≤-25 | ≥+100 | 900/650 | 300/300 | 40/40 |
| MIDA UNIFLEKS EKP 5.0 | 10×1 | Poliesters | 4.0 | 5.0 | ≤-20 | ≥+95 | 850/650 | 250/250 | 40/40 |
| MIDA UNIFLEKS EKP 5.0 balts | 10×1 | Poliesters | 4.0 | 5.0 | ≤-20 | ≥+90 | 850/650 | 250/250 | 40/40 |
| MIDA BALT PV S4b | 10×1 | Poliesters | 4.2 | 5.2 | ≤-20 | ≥+95 | 900/650 | 300/300 | 40/40 |
| MIDA UNIFLEKS PV S4b | 10×1 | Poliesters | 4.0 | 5.0 | ≤-15 | ≥+100 | 850/650 | 250/250 | 40/40 |
| MIDA BIPOL STANDART EKP | 10×1 | Poliesters | 3.5 | 4.5 | ≤-15 | ≥+90 | 600/500 | 230/230 | 40/40 |
| MIDA BIPOL EKP 4.0 | 10×1 | Poliesters | 3.0 | 4.0 | ≤-15 | ≥+90 | 600/500 | 230/230 | 40/40 |
| BIKROELAST EKP 4.0 | 10×1 | Poliesters | 3.2 | 4.0 | ≤-10 | ≥+85 | 600/500 | 230/230 | 40/40 |
Underlay modified bitumen materials
| Ruļļa garums/platums (m) | Pamatnes veids | Biezums (mm) | Svars (kg/m2) | Elastība zemās temperatūrās (°С) | Siltumizturība (°С) | Pārraušanas spēks G/Š (N/50mm) | Pārraušanas spēks ar naglu G/Š (N) | Īpašais pagarinājums G/Š (%) | |
|---|---|---|---|---|---|---|---|---|---|
| MIDA TECHNOELAST K-MS 170/4000 | 10×1 | Poliesters | 3.0 | 4.0 | ≤-25 | ≥+100 | 700/500 | 250/250 | 50/50 |
| MIDA TECHNOELAST PV S5s | 5×1 | Poliesters | 5.0 | 6.1 | ≤-25 | ≥+100 | 1000/900 | 400/400 | 40/40 |
| MIDA TECHNOELAST PV S4s | 10×1 | Poliesters | 4.0 | 5.0 | ≤-25 | ≥+100 | 900/650 | 300/300 | 40/40 |
| MIDA UNIFLEKS EPP 4.0 | 10×1 | Poliesters | 3.0 | 4.0 | ≤-20 | ≥+95 | 800/600 | 200/200 | 40/40 |
| MIDA BALT PV S3s | 10×1 | Poliesters | 3.0 | 4.0 | ≤-20 | ≥+95 | 800/600 | 250/250 | 40/40 |
| MIDA UNIFLEKS PV S3s | 10×1 | Poliesters | 3.0 | 4.0 | ≤-15 | ≥+95 | 800/600 | 200/200 | 40/40 |
| MIDA BIPOL STANDART EPP | 10×1 | Poliesters | 2.5 | 3.5 | ≤-15 | ≥+85 | 600/500 | 230/230 | 40/40 |
| MIDA BIPOL EPP 3.0 | 15×1 | Poliesters | 2.3 | 3.0 | ≤-15 | ≥+90 | 600/500 | 230/230 | 40/40 |
| MIDA BIKROELAST EPP 4.0 | 15×1 | Poliesters | 3.0 | 4.0 | ≤-10 | ≥+85 | 600/500 | 200/200 | 40/40 |
| BIKROELAST EPP 3.0 | 15×1 | Poliesters | 2.3 | 3.0 | ≤-10 | ≥+85 | 600/500 | 200/200 | 50/50 |
Self-adhesive materials
| Ruļļa garums/platums (m) | Pamatnes veids | Biezums (mm) | Svars (kg/m2) | Elastība zemās temperatūrās (°С) | Siltumizturība (°С) | Pārraušanas spēks G/Š (N/50mm) | Pārraušanas spēks ar naglu G/Š (N) | Īpašais pagarinājums G/Š (%) | |
|---|---|---|---|---|---|---|---|---|---|
| MIDA SELF SA P 2mm | 20×1 | Poliesters | 2.0 | 2.3 | ≤-20 | ≥+90 | 450/350 | 200/200 | 30/30 |
| MIDA SELF PRO | 15×1 | Poliesters | 1.5 | 1.8 | ≤-15 | ≥+90 | 400/350 | 200/200 | 30/30 |
