Solid MBK-G mastic consists of a mix of oxidized bitumen and mineral fillers. MBK-G mastics have sufficient penetrability and have good water-repellent and adhesive properties.
- adhesion of roll-fed bitumen materials
- crack sealing
- surface waterproofing
Warm up mastic to a temperature of 160-180°С with constant mixing and apply while still in a liquid state on a dust-free primer-coated base by a putty knife, small paint brush, or by pouring and leveling using special combs (spreading knifes). After cooling, a strong coating with good adhesion to the base is formed.
Store in a dry place protected against sunlight at a temperature between –20°C and +30°C. Storage time: 12 months.
|Strength of adhesion to the base, MPa||with concrete=0.1 / with metal=0.1|
|Glued coupling shear force, kN/m||4|
|Softening temperature, °С||+83|
|Type of packaging||Polyethylene film and paper package|
|Package weight netto, kg||30|
|Strength of adhesion to the base, MPa||Glued coupling shear force, kN/m||Softening temperature, °С||Type of packaging||Package weight netto, kg|
|with concrete=0.1 / with metal=0.1||4||+83||Polyethylene film and paper package||30|